Best Kenwood 2000 Watt Subwoofer

So, if you're looking for a good kenwood 2000 watt subwoofer to get the job done and don't want to waste a single second reading another website, look no further.

We've done all the hard work for you!.

List of Top Kenwood 2000 Watt Subwoofer

Review of Best Kenwood 2000 Watt Subwoofer

1. Kenwood Excelon KFC-XW1241 12" 4-ohm Component Subwoofer | Peak Power 2000W

  • X-Motif Cone controls resonance frequency and cuts unnecessary frequency, delivering powerful and solid bass response.
  • The KFC-XW1241 has a robust thermal management system implemented with an Aluminum Bobbin, Closed Yoke Design, and Advanced Airflow Control.
  • Computer-optimized damper controls stress and increases mechanical durability.
  • The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10-gauge.
  • Power handling: 300 watts RMS (2000 watts peak)

2. Kenwood Car Audio KFC-PS3017W PS-Series 30cm 12" 2000w Single VC 4Ohm Subwoofer

  • his 30cm Subwoofer has a robust thermal management system, implemented with an Aluminum Bobbin, Closed Yoke Design, and Advanced Airflow Control.
  • 400 Rated/RMS Input Power
  • Peak Input Power 2000W

3. Kenwood Excelon KFC-XW1221HP 12" 2-ohm Component Subwoofer | Peak Power 2000W

  • Dimensions (W x H x D): 12-13/16in x 12-13/16in x 11 in
  • Weight: 16.3 lbs
  • Mounting Depth: 5-3/16 in
  • Surround: Rubber
  • Magnet: Ferrite

4. Kenwood Excelon XR-W1204 12" 4-ohm Oversized Component Subwoofer with Peak Power of 2000 Watts

  • Speakers may be the most important piece of the sound quality puzzle. eXcelon speakers employ oversized drivers to enhance low-end range and large tweeters that improve mid- to high-range transitions, ideal for clear and dynamic vocals. Oversized woofers provide quick response and offer stable and powerful bass that remains true to the original recording.
  • Speaker and subwoofer development requires a diligent testing process including an anechoic chamber, power testing facility and the most advanced desktop applications for design and simulation. These high standards allow KENWOOD eXcelon speakers to deliver their expected performance and have long term reliability so your music can be enjoyed for many years.
  • Low frequency output is increased because of a larger cone size. The cutout diameter has remained the same making this feature of the new XR woofers ideal for most vehicles where space is a premium. The XR woofers are ideal for a small sealed box.
  • By adopting a "Stress-free Spider" and a "Thermal Efficient System" the mechanical and thermal durability has been improved dramatically delivering smooth and strong bass sound with long lasting reliability.
  • The newly designed cone features ribbing that adds strength to the cone and minimizes distortion.

5. KENWOOD KAC-PS917D KAC-9106D Car Amplifier 2000w Single Channel Monoblock Class D Car Audio Subwoofer

  • 2000W Peak Input Power Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-PS917D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.
  • RMS Power at 4 Ohms: 500W X 1 Ch----RMS Power at 2 Ohms: 1000W X 1 Ch
  • Controls: Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-PS917D features an adjustable gain control, 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level. Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point, 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged. Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.
  • Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.
  • Variable High-Pass Filter Variable Low-Pass Filter Speaker Level Input with Signal Sensing Turn On

6. Kenwood Excelon KFC-XW1241HP 12" 4-ohm Component Subwoofer | Peak Power 2000W

  • Dimensions (W x H x D): 12-13/16in x 12-13/16in x 11 in
  • Weight: 16.3 lbs
  • Mounting Depth: 5-3/16 in
  • Surround: Rubber
  • Magnet: Ferrite

7. Kenwood KFC-W3041 12" 4 Ohm 2000W Car Subwoofer (Single) with Gravity Magnet Phone Holder Bundle

  • Kenwood KFC-W3041 (Single) + Gravity Magnet Phone Holder Bundle
  • Subwoofer Type: 12 inch PP Cone
  • Peak Power: 2000 W (300 W RMS)
  • Frequency Response: 29Hz-300Hz
  • Impedance: 4 ohms / Mounting Depth: 5-3/8 inch

8. Kenwood KAC-9106D 2000W Monoblock Class D Car Audio Power Amplifier

  • Mono subwoofer amplifier
  • 500 watts RMS x 1 at 4 ohms (1, 000 watts x 1 at 2 ohms)
  • Class D amp design
  • Speaker-level inputs with signal Sensing turn-on
  • Variable low-pass filter (50-200 Hz at 24 dB per octave)

9. Polk Audio PSW10 10" Powered Subwoofer - Power Port Technology, Up to 100 Watts, Big Bass in Compact Design, Easy Setup with Home Theater Systems Black

  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
  • DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete!

10. Kenwood KAC-9106D 2000W Monoblock Class D Car Audio Power Amplifier (KAC-PS917D)

  • 2000W Peak Input Power RMS Power at 4 Ohms: 500W X 1 Ch RMS Power at 2 Ohms: 1000W X 1 Ch
  • Speaker Level Input with Signal Sensing Turn On Variable High-Pass Filter Variable Low-Pass Filter
  • Controls: Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-PS917D features an adjustable gain control, 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level. Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point, 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged. Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.
  • Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.
  • Variable High-Pass Filter Variable Low-Pass Filter Speaker Level Input with Signal Sensing Turn On

Last update on 2022-01-16 / Affiliate links / Images from Amazon Product Advertising API